Powerdercoating services comming in March

[kidcrash603]

my dad used to.. pull to end of the driveway pull the oil plug let it drain put it back in and push the car back and fill it with oil.

My buddy in Indiana had a huge tree stump in his backyard several years ago. We were working on a race car and had to change the oil. When we were done, he stuck a funnel in a hole in the stump and poured in the oil.

When I asked him about it, he said his family had been doing that for years. The hole in the stump went down several feet to a void.

A couple years ago they decided to burn the stump in the winter. He said it burned for 6 days and burned out the majority of the roots all through the yard.

LOL

[JustMe]

Things are progressing well, however we are still looking for an oven... Spring is comming, time fore home renevation so if anyone is getting rid of the "old" for something new, please let us know, we'd be happy to give you a discount on some of your powdercoating needs. Thank you as always
Custom Autobody

What kind of stuff are you looking for?

[g20sleeperjdm]

What kind of stuff are you looking for?

ah... i'll guess an oven?

[Matt Musto]

Deleted

[Dagazenterprise]

Still on the lookout for a used oven, discount on services for anybody who is getting rid of one and sends it our way.

[eGJaKe22]

cool i was looking for a place to powder coat some wheels i got. deffinetly will remember you guys..

[knighthawk]

i believe chrome and nickel plating require caustic chemicals, a great deal of electricity and a big shop, it would be cool but i don't think it's something a hobby shop could get away with due to the EPA and state and town laws

You are correct about this my work deals with a company in mass to get things stripped and re-chromed and I've been to the shop that it is done at it is a fairly large facility and it requires a lot of caustic chemicals to strip the pieces and prep them for chroming. A electrical charge is used when the pieces are being soaked in the chroming troughs to apply the chrome to them. The pieces are soaked for certain amounts of time depending on how thick a layer of chrome is being applied to the piece being chromed. It is a very expensive and time consuming process.

[Dagazenterprise]

and requires a lot of illegal's so they don't have to pay medical for them in case they get sick, hehe

[brandywine68rs]

I will let you know when I am set up to do powder coating. Right now I have a good line on a oven im just waiting for him to switch over to gas. In the mean time I will just have to be patient until that or another oven comes along. Once I am set up I will do some practice peices and let you know how things came out. Thank you for your intrest and patience. Scott.

[brandywine68rs]

Scott from Custom Auto Body ,I picked up an oven today. I will be doing some practice parts very soon. When I do I will post my results.

[Boosted Euro]

Think it will fit a 13inch wheel ?

[brandywine68rs]

Im going to be moveing things around today. I will take measurements today. Scott.

[Boosted Euro]

Im going to be moveing things around today. I will take measurements today. Scott.

Ok there 13x8 or 8.5 . Not sure on what I have for money or if you are set up yet but I have a show in 2 weeks. So I may just re- spray them for now and have them powder coated later.

[brandywine68rs]

I took measurements todoy. Here they are 15" deep 20" wide and 8" max hight. Will be ordering some blasting grit on monday, and then look for something to practice on. Will keep you posted.

[Boosted Euro]

I took measurements todoy. Here they are 15" deep 20" wide and 8" max hight. Will be ordering some blasting grit on monday, and then look for something to practice on. Will keep you posted.

Wheels are off the car I measured them.13x8 fronts 13x8.5 rear , I thought the guy I bought them from said they were 7 and 8 but then the other day he said 8.5. So I guess I remembered wrong.

But either way rears are to big , thanks anyway.