joes randumb thread

[AntMan401]

I'll keep an eye out in the up coming months

[vsm96ek]

the road and track sections have been split up for better discussion guys for current to next years season.

[gasper44]

Joe...

http://www.newegg.com/Product/Product.aspx?Item=N82E16820208086

I personally have had good luck with this brand though:

http://www.newegg.com/Product/Product.aspx?Item=N82E16820227157

Should give you some good time for your new car cam.

[vsm96ek]

thanks, but tina ended up getting me one w/ a usb holder. she found it cheap on sale.

[vsm96ek]

updates:
i decided im gonna change up some parts on the b18b. so i piced up a new ported manifold to replace the stock one. no name copy, but the quility is the same as an over priced skunk or blox manifold. in the end it cost me 110.00 shipped.

ive also picked up a few new specialty tools. civic/acura rear trailing arm bushing extractor. i use to cut them out. but ive grown keen on using the man made tool to do the job. save alot of time. dont have to remove the trailing arm off the car,simple drop down from the main bushing mount. and presto chango. out with the old in with the new.

now i also got a set of bumper plate hole covers in my color for my car. so im picking them up sometime today along with 3 tubes of honda bond and a oil pan gasket i had ordered via the phone yesterday from majecstic with my special discount.

im on the lookout for brian crower cams or crower stage 1 or 2 cams, crower i know is on sale for $300.00 but i havent decide if i really need them or not...


ohh ant ant if you wanna get rid of my old header back to me if and when you dcide to part with it. i may buy it if the price is right. i remember how much sold it for

[AntMan401]

Haha, yea Joe, I do plan on getting rid of it. I'll sell it to you but to be honest, I forgot how much I bought it off you for lol. So I'm going to go out on a limb and say . . . . .wanna buy it for $100? Haha. Let me know how much I bought it off you for. Can't remember if it was $100 of $150.

[gasper44]

updates:
i decided im gonna change up some parts on the b18b. so i piced up a new ported manifold to replace the stock one. no name copy, but the quility is the same as an over priced skunk or blox manifold. in the end it cost me 95.00 shipped.

ive also picked up a few new specialty tools. civic/acura rear trailing arm bushing extractor. i use to cut them out. but ive grown keen on using the man made tool to do the job. save alot of time. dont have to remove the trailing arm off the car,simple drop down from the main bushing mount. and presto chango. out with the old in with the new.

now i also got a set of bumper plate hole covers in my color for my car. so im picking them up sometime today along with 3 tubes of honda bond and a oil pan gasket i had ordered via the phone yesterday from majecstic with my special discount.

im on the lookout for brian crower cams or crower stage 1 or 2 cams, crower i know is on sale for $300.00 but i havent decide if i really need them or not...


ohh ant ant if you wanna get rid of my old header back to me if and when you dcide to part with it. i may buy it if the price is right. i remember how much sold it for

Jesus. Guess LSVtec is out of the question for this year.

My bumper hole covers came in the other day, got them from honda-tech. 6 bucks shipped, and painted. Why is it we don't tell eachother any plans, but wind up getting same stuff sometimes. I think you have a microphone in my room or something, but just so you konw, I did find the toilet cam you planted last week as well...

[vsm96ek]

(AntMan401) Haha, yea Joe, I do plan on getting rid of it. I'll sell it to you but to be honest, I forgot how much I bought it off you for lol. So I'm going to go out on a limb and say . . . . .wanna buy it for $100? Haha. Let me know how much I bought it off you for. Can't remember if it was $100 of $150.

it was indeed $150.00 just lmk when your ready to sell...im in no rush to rush you. i have the cash ,just say the word when your ready.

(gasper44) Jesus. Guess LSVtec is out of the question for this year.

My bumper hole covers came in the other day, got them from honda-tech. 6 bucks shipped, and painted. Why is it we don't tell eachother any plans, but wind up getting same stuff sometimes. I think you have a microphone in my room or something, but just so you konw, I did find the toilet cam you planted last week as well...

nah no ls/v im happy with my non vtec. its good enough for what im doing.
as for parts i just eye ball stuff.i cant help it people like what ive always done and liked
as for spying, i dont use toilet cams. i have satelite's

[AntMan401]

No prob joe, I'll let you know. My Car will most likely be put away for the Winter next Month so thats when I'll be taking stuff apart.

Those Bumper Hole Covers are tit. I got them awhile ago from Majestic Honda too. They make the Front End look a lot cleaner when the holes aren't there

[vsm96ek]

yeah i was there and i was asked anything else . im like yeah this just came to me. i need the covers for the plate holes. im gettimg sick and tired of looking at the holes..lol, guys like ohh those things..lol

[vsm96ek]

meh todays randumbness.
some pic's of the new manifold,fuel rail "TEST" install. still waiting on a hondata mani gasket.

out with the old restricted poor factory manifold and in with this new skunk2 copy.



the money shot as people would say..lol

[Ben]

Looks good.

[AntMan401]

Fresh. What Fuel Rail is that?

[vsm96ek]

I couldnt beggin to tell ya ant, it was a surprise when i opened the box it was sitting in it with the mani and it also came with those fel-pro metal/lead gaskets.

but i had a honda tb gasket, and had on order from jhp a hondata gasket.

[poor mans ctr]

looks good joe