NEMS Toolbox- Need a special tool? look here first !

[toehead]

Just an idea I had. This thread is for people to post specialty tools that they might have in case other members need them. I'll start.


Toehead has:
MIG welder (gas/flux)
Tactrix cable
Megasquirt tuning software
Pitman arm puller for older steering boxes (aka camaro)
Inline spark tester
Battery load tester
Hydrometers for battery and coolant
Impact sockets
Claw puller

[smc0922]

Ugh id have to make my own forum for my tools.... Most of the regulars have seen my toolbox.. they know its full!


Besides the common tools (Screwdrivers, sockets, wrenches, etc.)
Crank window removal tool
Plastic trim piece removal set
Air compressor and air tools
Extractors for broken nuts and bolts
Prybars
BIG Wrenches 1 3/8" to 2"
Cartridge oil filter sockets for Toyota/Mazda
2.3 Duratec timing chain alignment tool and camshaft locking plate
Wiper arm puller
More than I can remember at this moment.

[d3ad1ysp0rk]

Great thread, but one nitpick - Megasquirt is free


Mine:
- Oxy/Acetylene torch
- Air tools (1/2" impact gun, 3/8" ratchet wrench, cutoff tool, grinder, etc)
- Small bench sander
- Lots of large sockets (21-35mm range, including standard sizes)
- Tap/die set

Can't think of much more that isn't common stuff that everyone should have...

[Dagazenterprise]

Tig welder, stick (Inverter, runs on 120, 220 and 460, single and three phase, totally portable, 45lbs)
Mig welder
12 ton hydraulic press, good for bearings etc.
oxy acet. torch
Snap-on parts washer
old Triumph motorcylcle tools
Reloading press for 9, 40 and 45 ammo
huge horizontal band saw
Millwaukee deepcut portable bandsaw

[OVRBST]

MIG welder
TIG welder
Spring compressor (for doing lowering springs)
Hydraulic press
bandsaw
14" chop saw
3/4" impact and huge sockets
Tactrix 2.0
All kinds of software for all kinds of EMS'
Tons of clutch alignment tools I've saved over the years.


Those are the ones off the top of my head.

[N9nefiveAccord]

All your basic tools/air tools

-Air saw
-Die grinders
-Round-outs/screw extractors
-9/16 Spark plug socket (Newer Fords)
-Timing light

Just ask, I'm an auto tech by trade

[JandSauto]

Things I dont have.... yet.

1) Powdercoater
2) Dyno
3) Tig welder.

Other then that I have everything you could possibly need in a shop.

[kidcrash603]

Trifecta Tuning software with OBDII cable for GM tuning

18' car trailer with 8000lb winch

Access to a motorcycle lift at my buddy's place

Access to my old 2ton engine hoist at my buddy's place

I think Quirk is a special kind of tool, and I've got access to him too, so there's that.

[BLACK-OUT]

Aside from, Sockets, Screw Drivers, Rachets. I have got

Air Compressor Air grinder, Impact guns, air rachets.
Cutting torch
Various Jack's and Stands
Engine Stands
Various files and clamps

nothing special but I can do a few things.

[Boosted Euro]

I think Quirk is a special kind of tool, and I've got access to him too, so there's that.

Lmfao

[Boosted Euro]

Was thinking off making another one of these threads but amazingly the search function worked..lol

So BUMP, Post up any Specialty type tools you have that you wouldn't mind lending out or letting someone come by and use . No point posting if your not going to share..lol


I'm in goffstown NH and have :

OBDII scan tool
Euro scan tool (Vchecker Pro)
R32 rear haldex filter tool
Timing gun
Vacuum gauge
CIS Fuel Pressure tester
Bosch CIS fuel system Book , covers all Bosch mechanical fuel injection systems.
Large socket for e36 front wheel bearing ( need to look up actual size ) 1-3/4 maybe

[Zoom6]

This thread is new to me. Well deserved sticky.


I'm in Londonderry, NH and have...


14mm (I think) colortune plug set (a glass window in a spark plug to see the color of the combustion flame. useful for tuning carb'd bikes. set of 4)

4 channel vacuum balancing tool thingy (measures vacuum in 4 different ports for carb balancing)

4" cut off wheel (pneumatic)

die-grinder (pneumatic)

shears (pneumatic)

3.0L Duratec engine stand adapter (mounts side of engine to a stand)

various cat 5/6 (network) tools

dremel

6kw digital power filtered generator (I've got to like/know you pretty well to lend this one out though)

[Boofy]

does a garage count? lol

[Sean]

^^there is no better tool than that...

[Zoom6]

[MENTION=22877]Sean[/MENTION]'s a pretty big tool. Should he be on the list?