Fitment

[Fuller]

Just checked out the ebay store. Seems that you only have 1 set of wheels in 5x108. Kind of a off bolt pattern. Do you carry anything else? Don't want chrome. 16"s or 17"s is ideal. Was not looking to buy but I got an amazing offer on my BBS' so they might be sold. Thanks.

[Motostar Performance.com]

Fuller,
The 5x108 is not a very common pattern for us. What is the year, make, and model Volvo do you have? It is very likely that I could get something ordered for you, a couple brands that I carry have some styles in the 5x108, but I need the vehicle info to ensure proper fitment. Thanks

Gene

[Darkdrifter]

Gene,

We could also to the PCD variation bolts like we did on the C30. That way they will be able to do 5x110 which is a little more common of a bolt pattern. They run around $100 a set.

Bill

[Boosted Euro]

Gene,

We could also to the PCD variation bolts like we did on the C30. That way they will be able to do 5x110 which is a little more common of a bolt pattern. They run around $100 a set.

Bill

Wobble Bolts?

[Fuller]

If you stock wobble bolts in the correct thread size for Volvos I will be your best customer. I can not find them ANYWHERE.

The car is a 98 V70 wagon.

[Fuller]

So is your customer service always this slow with potential buyers? Or only because this is the internet?

[Darkdrifter]

We can special order them. Its not something we normally keep in stock. They are not cheap either. $125 for the set. Sorry about the delay. I don't normally watch this site as much as Jr. He has been busy entering a bunch of the 2010 products into our system.

[Fuller]

I would take a set if you can get them. I would also be able to get you a ton of business. Finding wobble bolts with the correct thread pitch for a volvo would be amazing. It would allow 5x108 people to run 5x110 which is a much more common pattern. Where is Mostar located? If you wouldn't mind I would like to drop off a Volvo wheel lug and see if you can match it. Thanks - Kyle

[Darkdrifter]

Let me see if they are still available. Do you have the bolts or lugs? Volvo likes to mix it up. Some use Bolts some normal lugs. The problem with the bolts are the heads are big and don't fit in many wheels. The C30 uses normal lugs so its not bad. On the flip side of that you can pretty easily convert it to using normal lugs to. Let me know what you need and I will get a set in for you.

[Fuller]

I have the bolts. The problem is finding wobble bolts with the correct pitch. I have exhausted all my efforts trying to find some. Do you think you can get some?

[Motostar Performance.com]

Fuller,
I just got off the phone with the manufacturer, they have a couple sets of the 14mm x 1.50 pcd variation bolts available, but there may be an issue with fitment. Not all aftermarket wheels can accept the pcd variation bolts because the width of the pivoting taper washer is too large for holes in most "tuner" wheels.

The manufacturer is going to measure the width of the pivoting taper washer and call me back. They are also going to give me a rundown of their wheels that can accept these bolts. They suggested that the customer look for more "luxury" styled wheels that have a larger bolt/lug hole diameter vs. the "tuner" styles to increase your chances of proper fitment.

I will follow up as soon as I have more information. Thanks for your patience on this.

Gene

[Motostar Performance.com]

Following up, the pcd variation bolts are available and have a diameter of 29mm. If you already have a wheel in mind your best bet is to measure the bolt hole diameter to see if it will clear before you purchase these bolts, as they are special order and cannot be returned. Your cost on the PCD Variation bolt kit is $125.00 shipped. Let me know how you would like to proceed.

Gene

[Fuller]

Gene, thanks a ton. I am really looking to run stock Cobalt SS or Saab wheels. Not looking to much for a tuner style wheel. I will measure one up this weekend and go from there. Either way I will buy at least 1 set from you, if not 2.

[Motostar Performance.com]

Fuller,
You are very welcome. Let me know when you would like me to place the order for the kit(s). Shipping typically takes a couple days from this manufacturer. Have a good one!

Gene