Tweet
Congradulations Dag!!!!! Nov, COTM or Truck of the Month lol
Dagazenterprise - 1993 S10 with a Turbocharged V8
Specs
Engine ZZ4 short block with AFR heads, 227cc runners 2.1 intake and 1.6 exhaust valves
Harland Sharp 1.5 ratio roller rockers
Milodon windage tray and crank scraper
Milodon 7qt oil pan
Weiand single plain intake
CSU carburetor holley 750cfm based, supports up to 1200hp
Aeromotive A1000 fuel pump
Mallory 4 port boost reference fuel regulator
Superior airflow carb hat
Tial 50mm blow off valve
HKS knockoff waste gate, ebay - $90
Holset H2E turbo
Hosetechniques silicone charge pipe couplers
Ebay 3 inch aluminum tubing, $90 for 6 bends and 2 straits, did the whole setup with one kit
Custom exhaust, no more cats
Magnaflow 4 inch cherry bomb type mufffler
Turbonetics boost controller set at 6psi
Hedman torque step headers (no real nead now that it's forced induction)
K&N air cleaner
MSD spark plug wires
Autolite race plugs
Crane Cams HI6-R capacitive ignition with boost proportional retard control
Snow performance stage 1 methanol injection chemical intercooler
Stock 7.6 inch rear end with heavy duty cover (possibly why it hasn't lunched)
Power trax locker
Custom drive shaft
Turbo 400 trans with shift kit, no kickdown
TCI 10 inch 3500 stall conveter
Summit racing line lock
B&M light truck megashifter
Autometer and Nordskog gages
Innovate wideband air fuel gage
Costom body work by myself and neighbor, 92 caddy tail lights with custom buckets and reverse lights (made by me)
Paint color is 2003 color code A36 Nissan 350Z LeMans Sunset Chromabase
Best run was 11.098 @123mph at only 6psi and a 2300rpm launch with the 3500 stall converter. They booted me out for no roll cage and fire jacket.
Dagazenterprise - 1993 S10 with a Turbocharged V8
Specs
Engine ZZ4 short block with AFR heads, 227cc runners 2.1 intake and 1.6 exhaust valves
Harland Sharp 1.5 ratio roller rockers
Milodon windage tray and crank scraper
Milodon 7qt oil pan
Weiand single plain intake
CSU carburetor holley 750cfm based, supports up to 1200hp
Aeromotive A1000 fuel pump
Mallory 4 port boost reference fuel regulator
Superior airflow carb hat
Tial 50mm blow off valve
HKS knockoff waste gate, ebay - $90
Holset H2E turbo
Hosetechniques silicone charge pipe couplers
Ebay 3 inch aluminum tubing, $90 for 6 bends and 2 straits, did the whole setup with one kit
Custom exhaust, no more cats
Magnaflow 4 inch cherry bomb type mufffler
Turbonetics boost controller set at 6psi
Hedman torque step headers (no real nead now that it's forced induction)
K&N air cleaner
MSD spark plug wires
Autolite race plugs
Crane Cams HI6-R capacitive ignition with boost proportional retard control
Snow performance stage 1 methanol injection chemical intercooler
Stock 7.6 inch rear end with heavy duty cover (possibly why it hasn't lunched)
Power trax locker
Custom drive shaft
Turbo 400 trans with shift kit, no kickdown
TCI 10 inch 3500 stall conveter
Summit racing line lock
B&M light truck megashifter
Autometer and Nordskog gages
Innovate wideband air fuel gage
Costom body work by myself and neighbor, 92 caddy tail lights with custom buckets and reverse lights (made by me)
Paint color is 2003 color code A36 Nissan 350Z LeMans Sunset Chromabase
Best run was 11.098 @123mph at only 6psi and a 2300rpm launch with the 3500 stall converter. They booted me out for no roll cage and fire jacket.
Anti-Speedbump Society 
Comment