Exhaust Fabricator

[jsann]

Does anyone know a place that would be able to fabricate a 3" exhaust for me. Or it could be someone who does it at their house.

I don't have much time between family and work so the closer to my house the better.

I live in Lowell, MA.

[g20sleeperjdm]

lous

[:Quirk:]

Lou's

[GTS4-R]

We have an inhouse fabricator at Kaizen Tuning.

If you want economical go to lou's they can crush bend a mild steel setup cheap. If you want a quality stainless TIG'd setup let me know

[jsann]

Not interested in Lous work. I need a 3" mandrel bent setup.

[g20sleeperjdm]

lous has a mandrel bender in manchester up here, not sure if they still do crush bent down there tho

[:Quirk:]

They do. They made my pipe for the jeep

[g20sleeperjdm]

i think they do pretty damn good work esp for what you pay (can't beat that part).. you just have to make sure you coat all the welds, and Jonny does it in Manch... lol

[:Quirk:]

The trick is to watch em. Like be under the car while they are.

[Boosted Euro]

Can be done at almost any of are current Vendors. Ballistic Motorsport, Wicked C.A.S. and if you want the someone at there house like you mentioned are vendor Dagazenterprise works out of his.garage and does great work.

Unfortunately all are in NH but not to far away .

[Zoom6]

Can be done at almost any of are current Vendors. Ballistic Motorsport, Wicked C.A.S. and if you want the someone at there house like you mentioned are vendor Dagazenterprise works out of his.garage and does great work.

Unfortunately all are in NH but not to far away .

+1 for Dag. I've seen his work and I like it. I was gonna have him make up my 3" stainless exhaust before the engine blew. Will still likely have him make it after the engine is done.

[jsann]

Whenever we hear Lou's Exhaust down here we think crush bends and mig welding. I prefer SS mandrel with tig welding. But I will give the guys up on Manchester a call.

I am trying to get the car ready for the 1st for a tuning session with Alex over a GSD, I would hate having to tow the car up there, back, and then back over there again. That's why I prefer getting it done locally so I don't have invest too much in trailer rental expense.

[Dagazenterprise]

+1 for Dag. I've seen his work and I like it. I was gonna have him make up my 3" stainless exhaust before the engine blew. Will still likely have him make it after the engine is done.

Yeah, figured the exhaust was on the back burner after seeing pics of the metal in the pan, thanks for the name drop

[jsann]

Sent Dag a message.

[jsann]

Spoke to John over at Lou's in Manchester and I was informed that they DO NOT have a mandrel bending machine.